Siemens SIMATIC PCS 7 - Features for the Configuration Phase

3.5 Features for the configuration phase
Features for the configuration phase
In the configuration phase, PCS 7 provides you with support with the following features.
Feature Meaning
Fault prevention through simplified configura‐
tion of the various components
You do not need additional training to configure the re‐
dundant components. Configuration can be performed
in a similar way as for standard systems.
Simple integration of redundant I/O No special knowledge is needed about redundant I/O
modules.
The communication links between the sys‐
tem components are configured transparent
to the application.
With the HW Config or NetPro graphical user interface,
the configuration of the communication links is per‐
formed transparent to the application.
Basics of high availability
3.5 Features for the configuration phase
High Availability Process Control Systems (V9.0)
26 Function Manual, 05/2017, A5E39221836-AA