Maintenance and service
11.2 Reinstalling the software
SIMATIC Rack PC 840 V2
Operating Instructions, Edition 05/2006, A5E00248055-04
11-27
11.2.8 Installing the SCSI Controller software
The procedure for installation can be found in the "Installation_Instructions_Win98_WinNT"
on the supplied "Documentation and Drivers" CD.
New installation of the software at Windows NT
In case of new installations of the software, you have to install a driver for older operating
systems such as Windows NT.
The driver is available in the directory \Drivers\SCSI\U160 on the included "Documentation
and Drivers" CD.
11.2.9 Installing burner/DVD software
The supplied CD provides information about installation of the burner/DVD software.
To Next Page
Loading...
