Safety information
2.5 Target group and personnel qualifications
S7-1500R/H redundant system
20 System Manual, 01/2024, A5E41814787-AF
2.5 Target group and personnel qualifications
All persons working with this device require the following knowledge:
• Contents of this document as well as contents of the enclosed documents.
• Handling the device (after instruction)
• Relevant standards and regulations
• Accident prevention regulations
The following activities are reserved for specially qualified personnel:
Working on electrical parts
Work on electrical parts may only be performed by the following persons:
• Qualified electricians
• Persons trained in electrical engineering under the direction and supervision of qualified
personnel.
Commissioning and configuration
Commissioning and configuration requires general knowledge in the field of automation
technology.
2.6 Personal protective equipment
The personal protective equipment depends on the activity and is determined by the
operator.
To avoid material damage during packing, unpacking and installation activities we
recommend:
• ESD wrist strap
• ESD shoes
To Next Page
Loading...
