Wiring
8.10 Connecting a communications processor
S7-1500R/H redundant system
288 System Manual, 01/2024, A5E41814787-AF
8.10 Connecting a communications processor
Introduction
You can connect the Industrial Ethernet to the communications processor via an RJ45
interface.
Connecting Industrial Ethernet to CP 1543-1
You can find more information on connecting the Industrial Ethernet in the CP 1543-1
(https://support.industry.siemens.com/cs/de/de/view/67700710/en) operating instructions.
To Next Page
Loading...
