Industrial cybersecurity
4.9 Secure operation of CPUs
S7-1500R/H redundant system
System Manual, 01/2024, A5E41814787-AF
57
Result: You have configured the transfer of syslog messages to a syslog server.
Figure 4-3 Transfer of syslog messages to a syslog server configured
Selecting the client certificate
STEP 7 provides the required client certificate for a CPU for the TLS transport protocol. If the
certificate is managed within the CPU, you can either choose an existing certificate or create
a new certificate. To do so, follow these steps:
1. Select the required CPU in the device or network view of STEP 7.
2. In the Inspector window, navigate to "Properties > Protection & Security > Syslog >
Certificates for Syslog".
3. Select the appropriate certificate in the "Client certificate" field.
To Next Page
Loading...
