Siemens Simatic series Manual

Welcome to the SIMATIC Rack PC IL 40 S
2-8
SIMATIC Rack PC IL 40 SManual
A5E00200171-01
2.5.3 CD ROM Drive
Optionally, the CD ROM drive is installed in the drive holder. The CD ROM drive
enables you to read CD-ROM, CD-RW and Audio/video CDs.
Operation
When pressing the open/close button the CD drawer is ejected with a short delay.
Insert the CD in the drawer, writing up. The CD drawer is automatically drawn in
when slightly pushing it or pressing the open/close button.
Emergency Eject
When the device is switched off, the disk can be forced out by using a pin (for
example, an opened up paper clip).
Notice
After the drawer has been closed, the CD is tested and the access LED on the
drive starts to flash:
– If the access LED flashes continually, the CD is faulty but can still be read,
– If the access LED flashes several times and then remains lit, the CD you
have inserted is defective and cannot be read.
– normally the access LED is lit when reading the CD.
Caution
CD ROM drives are sensitive to vibrations and shock. Any vibrations occuring
during operation can lead to damage to the drive or CD.

Siemens Simatic series Specifications

General

Processor	Intel Core i3, Core i5, Core i7
Operating System	Windows 10 IoT Enterprise, Linux
Storage	SSD, HDD
Interfaces	Ethernet, USB, RS-232/485
Ports	Ethernet, USB, Serial
Mounting	DIN rail, wall
Protection Class	IP65
Graphics	Integrated Intel HD Graphics
Expansion Slots	PCIe
Power Supply	24V DC or 100-240V AC
Operating Temperature	0°C to 50°C (depending on model)