Siemens Simatic series Manual

Reinstallation of the Software
9-2
SIMATIC Rack PC IL 40 SManual
A5E00200171-01
9.1 Cause / Remedy
In case of software errors reinstall your software using the Rack PC IL 40 S
Documentation and Drivers CD or the Restore CD.
Rack PC IL 40 S Documentation and Drivers CD: contains the documentation
and the hardware drivers.
Restore CD: contains an hard disk image file with the original delivery software
(Operating system with installed hardware drivers).
You can boot from the Restore CD by pressing the F12 key during the self-test
phase.
To restore all directories and files that were copied to your hard disk at the first set
up proceed as follows:
• Check whether you can restore your authorization on your hard disk. Refer to
the respective software on how to proceed.
Then proceed as described in Section 9.2.

Siemens Simatic series Specifications

General

Processor	Intel Core i3, Core i5, Core i7
Operating System	Windows 10 IoT Enterprise, Linux
Storage	SSD, HDD
Interfaces	Ethernet, USB, RS-232/485
Ports	Ethernet, USB, Serial
Mounting	DIN rail, wall
Protection Class	IP65
Graphics	Integrated Intel HD Graphics
Expansion Slots	PCIe
Power Supply	24V DC or 100-240V AC
Operating Temperature	0°C to 50°C (depending on model)