Siemens Simatic series Manual

Reinstallation of the Software
9-6
SIMATIC Rack PC IL 40 SManual
A5E00200171-01
9.3.2 Installing the Raid Controller Software
Reinstalling the Software
Please follow the instructions on the manual or the electronic manual supplied on
the CD on RAID Controller.
Instructions on Windows NT
For Windows NT you have to select FASTTRAK 100 TX2/TX4 from the
recommended lists.
When reinstalling Windows NT the ATAPI.SYS has to be activated, so that the
CD ROM / CD RW can be operated.
To do this, change the start type into restart via Control Panel > Devices > ATAPI >
Startup > Boot. You have to restart your computer afterwards.
Instructions on Windows 2000/XP
When reinstalling Windows 2000/XP you have to select FASTTRAK 100 TX2/TX4
from the recommended lists.
9.3.3 Installing the Burner Software
You will find instructions on installing and operating the burner software on the
supplied CD ROM for the burner software.

Siemens Simatic series Specifications

General

Processor	Intel Core i3, Core i5, Core i7
Operating System	Windows 10 IoT Enterprise, Linux
Storage	SSD, HDD
Interfaces	Ethernet, USB, RS-232/485
Ports	Ethernet, USB, Serial
Mounting	DIN rail, wall
Protection Class	IP65
Graphics	Integrated Intel HD Graphics
Expansion Slots	PCIe
Power Supply	24V DC or 100-240V AC
Operating Temperature	0°C to 50°C (depending on model)