Mechanical setup of the example station
4.2 Mounting of analog module components
SM331; AI 8x12 Bit Getting Started part 1: 4 -20mA
Getting Started, 11/2006, A5E00253410-02
4-3
4.2 Mounting of analog module components
4.2.1 General
Overview
Before the actual mounting of the SM331 the module has to be completed with a front
connector and the desired measurement mode of the inputs is set.
In this section, you will learn about:
● The components you need
● The properties of the analog input module
● What a measuring range module is and how it is configured
● Mounting a configured module
To Next Page
Loading...
Need help?
General
