Installation
4.9 Installing and removing the shaft-mounted gearbox
BA 2030
Operating Instructions, 02/2021, A5E37880173A/RS-AM
45
The shrink-fitted disc connection fastens the hollow shaft axially on the machine shaft.
Apply a thin layer of grease to the shrink disk seat on the hollow shaft.
Coat with a suitable lubricant to prevent frictional corrosion of the contact surface on the
customer's machine shaft in the vicinity of the bush.
Shrink disk comprising items ④ - ⑥
Figure 4-8 Mounting the shrink disk
To Next Page
Loading...
