1.3 About this manual
1.3.1 Content
These instructions describe the connectivity module, and provide you with information on how
to use the product – from installation through to maintenance.
Keep these instructions in a safe place for subsequent use.
In this documentation, the generic term "Connectivity module" is subsequently used for the
"SIMOTICSCONNECT400" product.
Read these instructions before you use the connectivity module, and follow the instructions
and notes carefully. In this way you can ensure safe, problem-free operation and a long
service life.
1.3.2 Target group
This documentation is intended for planners, conguring engineers, technologists, installation
personnel, programmers, commissioning personnel, service and maintenance personnel
1.3.3 Standard scope
Description
This documentation describes the functionality of the standard scope. This scope may dier
from the scope of the functionality of the system that is actually supplied. Please refer to the
ordering documentation only for the functionality of the supplied drive system.
Further functions may be executable in the system, which are not explained in this
documentation. However, there is no entitlement to these functions in the case of a new
delivery or service.
This documentation does not contain all detailed information on all types of the product.
Furthermore, this documentation cannot take into consideration every conceivable type of
installation, operation and service/maintenance.
The machine manufacturer must document any additions or modications they make to the
product themselves.
Introduction
1.3About this manual
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL 9
To Next Page
Loading...
Need help?
General
