Siemens SIMOTICS CONNECT 400 - 9.1 Disposing of the connectivity module

9.1 Disposing of the connectivity module
1. Check whether the connectivity module can still function.
2. If the connectivity module can still function reset all of the settings to the factory settings
(Page135).
3. Remove the battery.
4. Dispose of the battery in compliance with the applicable national regulations or recycle the
battery (Page201).
5. Dispose of the connectivity module in compliance with the applicable national regulations or
recycle it.
Comply with the directive of the European Parliament and Counsel regarding old electrical
and electronic devices (
http://eur-lex.europa.eu/legal-content/EN/TXT/?
uri=CELEX:32012L0019).
Disposal
9.1Disposing of the connectivity module
SIMOTICS CONNECT 400
200 Operating Instructions, 04/2023, A5E50161952B AL