Siemens SIMOTICS CONNECT 400 - 8.4 Basic functions (iOS)

8.4 Basic functions (iOS)
You can 󹪝nd the most important basic functions for the connectivity module in the dashboard
view of the "SIDRIVE IQ Con󹪝g" application.
An overview of all of the basic functions is shown in the following table:
Function Description
Commissioning Starts the onboarding process for "SIDRIVEIQFleet".
Delete Asset (O󹪜board‐
ing)
The process to disconnect the connectivity module from the MindSphere application "SIDRIVE IQ
Fleet" - including deleting all data - is called o󹪜boarding.
O󹪜boarding is the precondition for a new commissioning process (onboarding) to "SIDRIVE IQ Fleet".
Send data to Mind‐
Sphere
Starts transfer of the measurement data from the memory of the connectivity module to "SI‐
DRIVEIQFleet".
Precondition: The onboarding process has already been performed.
Maintenance
8.4Basic functions (iOS)
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL 137