Siemens SIMOTICS CONNECT 400 - Page 138

Function Description
Battery replacement Sets the battery status display to 100% after battery replacement (Page196).
Restart The connectivity module restarts. The connection to the connectivity module is disconnected. Meas‐
urement data that have still not been transferred to SIDRIVE IQ Fleet are lost. To avoid this data loss,
run the "Send data to MindSphere" function before you restart the connectivity module.
Reset to factory set‐
tings
Restores the factory settings of the connectivity module. The user credentials are reset to the factory
settings. All saved motor data and onboarding information are deleted.
Reset user credentials Resets the user name and the connectivity module password to the factory settings.
Note:
This function requires additional entry of the Wi-Fi password. This ensures that only authorized
persons can reset the user login information. If the Wi-Fi has not yet been con󹪝gured in SC400, the
"Wi-Fi password" 󹪝eld must remain empty.
Maintenance
8.3Basic functions (Android)
SIMOTICS CONNECT 400
136 Operating Instructions, 04/2023, A5E50161952B AL