Siemens SIMOTICS CONNECT 400 - Executing the Offboarding Process; Identifying the Connectivity Module Via the SIDRIVE IQ Config Application

7.1.1.3 Executing the o󹪜boarding process
1. Check the asset data.
2. Con󹪝rm the o󹪜boarding process by tapping on the "O󹪜boarding" button.
Result
The remaining o󹪜boarding process is carried out automatically. This operation takes approx. 5
seconds. Successful completion of the o󹪜boarding process is con󹪝rmed. The connectivity
module is now no longer connected to MindSphere and has deleted all the access data and saved
motor data. "SIDRIVE IQ Fleet" has deleted the asset and all the related data.
7.1.2 Identifying the connectivity module via the "SIDRIVE IQ Con󹪝g" application
Each connectivity module has a blue LED display in the front cover. The LED display is used to
visually identify the connectivity module that is currently connected to "SIDRIVE IQ Con󹪝g" more
easily.
Operation
7.1Operation with Android
SIMOTICS CONNECT 400
114 Operating Instructions, 04/2023, A5E50161952B AL