Siemens SIMOTICS CONNECT 400 User Manual

the motor in the "OFF" state. Precise data is displayed in SIDRIVE IQ Fleet as an "operating
mode" signal only after the calibration process:
• Value "0": Motor o󹪜 (OFF), sensor calibrated
• Value "1": Motor status not de󹪝ned, sensor not calibrated
• Value "3": Motor on (ON), sensor calibrated
No additional measures are required to support calibration.
Maintenance
8.7Replacing a motor (iOS)
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL 195

Siemens SIMOTICS CONNECT 400 Specifications

General

Brand	Siemens
Model	SIMOTICS CONNECT 400
Category	Control Unit
Language	English