Siemens SIMOTICS CONNECT 400 - Page 209

Wi-Fi Wi-Fi communication module SN8000/8000UFL to transfer measured data to SI‐
DRIVE IQ Fleet using an encrypted HTTPS connection via TLS 1.2 protocol as well as
for 󹪝rmware updates*
IEEE 802.11b/g/n
Frequency: 2400 GHz – 2483.5 GHz
RF output power: 2412 – 2472 MHz: 18.5 dBm (Max. e.i.r.p.)
Range: up to 100 m
* MindSphere synchronization interval adjustable between 1 hour and 48 hours (default: 24hours)
Status information
Diagnostics LEDs (blue) Status information during con󹪝guration
Integrated sensors
Measurement interval Con󹪝gurable between 1 minute and 1 hour
(default value: 5 minutes)
Temperature measurement
Area -40 °C to +85 °C
Resolution 0.03 °C
* Temperature measured at the contact between the connectivity module and mounting plate
Vibration measurement
Physical measurement principle Total vibration V
RMS
3 axes
Area 0.02 - 180 mm/s
Standard measurement: 10Hz to 1.6kHz (sampling rate: 3.3 kHz)
Performance measurement for a daily detailed evaluation of the health status: 10 Hz
to 3.3kHz (sampling rate: 6.6kHz, for measurement intervals≥5min)
Field measurement
Area 0.01 Hz to 300 Hz
Motor stray 󹪝eld
Standards, approvals, certi󹪝cates
See Directives and standards (Page209)
Degree of protection and protection class
Degree of protection according to EN
60529
IP65
Shock resistance according to Class 3M4 Max. 100 m/s² (tested according to Class 3M4)
Ambient conditions
Ambient temperature during operation -40 °C to +80 °C
Ambient temperature during storage /
transport
-20 °C to +40 °C
Relative humidity 5% to 95% (without condensation)
Software
Mobile app for commissioning and con‐
󹪝guration
SIDRIVE IQ Con󹪝g
Android version through the Google Play Store, iOS version through the Apple App‐
Store
Mechanics / material
Material of the housing Industrial plastic Durethan® (polyamide, halogen-free, glass-󹪝ber reinforced), ma‐
terial of the cover seal made of silicone
Material of the mounting bracket Stainless steel
Further information
10.3Technical data
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL 207