Procedure
1. The view to enter the login data for the connectivity module is displayed once the Bluetooth
pairing has been successfully established.
Enter the user name and password. Make sure that no blank is inserted at the end of your
entry.
2. Conrm your entries using the "Login" button.
The data are transferred. The dashboard view is displayed. Here, you can fully access all
connectivity module functions.
3. After 5 unsuccessful attempts with an invalid user name or an invalid password, for security
reasons, the login is locked for 3 minutes. You can then attempt to log in again.
Commissioning
6.2Commissioning with Android
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL 41
To Next Page
Loading...
Need help?
General
