Parameter Manual
Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
21
Machine data
2.1 Display machine data
Description: Protection level of tool offsets (wear) for writing
Description: Protection level Settable work offset for writing
Description: Protection level Setting data for writing
Description: Read protection level of part program
Description: Enter part program protection level
Description: Protection level program selection
Description: Protection level write R variables
Description: Protection level Change parameters for RS-232 interface
209 USER_CLASS_WRITE_TOA_WEAR --
- Write tool wear data protection level BYTE Immediately
-
-0 7 0 7 3/3
210 USER_CLASS_WRITE_ZOA --
- Write settable work offset protection level BYTE Immediately
-
-0 7 0 7 3/3
212 USER_CLASS_WRITE_SEA --
- Protection level write setting data BYTE Immediately
-
-0 7 0 7 3/3
213 USER_CLASS_READ_PROGRAM --
- Read protection level of part program BYTE Immediately
-
-0 7 0 7 3/3
214 USER_CLASS_WRITE_PROGRAM --
- Enter part program protection level BYTE Immediately
-
-0 7 0 7 3/3
215 USER_CLASS_SELECT_PROGRAM --
- Program selection protection level BYTE Immediately
-
-0 7 0 7 3/3
218 USER_CLASS_WRITE_RPA --
- Protection level write R variables BYTE Immediately
-
-0 7 0 7 3/3
219 USER_CLASS_SET_V24 --
- Set RS-232 protection level BYTE Immediately
-
-0 7 0 7 3/3
Siemens Controls
To Next Page
Loading...
Need help?
General
