2-25
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) -- 11.02 Edition
Installation Conditions
2.1 Secondary electrical conditions
The control is tested for compliance with the ambient conditions specified
below. Trouble-free operation is guaranteed only if:
S these ambient conditions are maintained in operation and transportation.
S original components and spare parts are used. This applies in particular to
the use of specified cables and plug connectors.
S mounting is carried out properly.
The control must not be started up until it has been confirmed that it complies
with the provisions of the 98/37/EC Directive.
Reference: /EMV/, EMC Installation Guideline
The installation conditions must be complied with for the complete system.
Please contact your local Siemens office or representative for assistance and
advice.
Compliance with
the connection
conditions
Additional
information
Assistance and
advice
2
To Next Page
Loading...
Need help?
General
