04/96
Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–159
SINUMERIK 840C / SIMODRIVE 611–D (DA)
160101 Internal error, end startup OK softkey
Startup application
–
Startup application cannot be executed because of internal error
No startup application or end startup application
160102 Memory area exceeded OK softkey
Start-up application at start of neural quadrant error compensation
The function cannot be started
Fine quantization * (coarse quantization +1) must be less than or equal to 1000
Reduce the size of fine and coarse quantization
Applies as from SW 4
160103 Invalid address assignment OK softkey
Start-up application at start of neural quadrant error compensation
The function cannot be started
Error in the parameterization of limit lower or upper area
Correct inputs
Applies as from SW 4
160104 Learning phase active file functions not possible OK softkey
Start-up application at file functions in the neural quadrant error compensation
Access to the file functions not possible
No file functions are allowed while measurement is taking place
Stop measurement or wait for end of measurement
Applies as from SW 4
160105 QEC bits not set OK softkey
Start-up application at start of neural quadrant error compensation
The function cannot be started
The activation bit of the neural QEC (NC MD) is not set
Set QEC bits
Applies as from SW 4
160106 Feedforward control not activated OK softkey
Start-up application at start of neural quadrant error compensation
The function cannot be started
The speed feedforward control must be activated
Activate speed feedforward control (option, NC MD, PLC bit)
Applies as from SW 4
160107 Axes not configured OK softkey
Start-up application at start of circle form test
The function cannot be started
Two real axes must be configured
Configure axes
Applies as from SW 4
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
1 Alarms
1.5.1 Alarm description
To Next Page
Loading...
