Siemens SINUMERIK 840C Diagnostics Guide

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–50
SINUMERIK 840C / SIMODRIVE 611–D (DA)
3033 There is no display text Acknowledgement key
S Cyclic
S Display text not displayed
The display text generated at the NC workstation has not been transferred to the link list.
Check the link list and relink to the NC workstation; watch out for linking errors.
3034 There is no special text Acknowledgement key
S On display selection
S Special text not displayed
The following texts have not been inserted or have been inserted incorrectly:
S Menu texts
S Dialog texts
S Mode texts
Check the display generated with NC workstation and where appropriate regenerate.
3035 Indirect addressing faulty Acknowledgement key
S Cyclic
S Variable values/texts not displayed
S The display description for indirect addressing is incorrect. This affects the details in the display
header for
– data group,
– data type,
– data number and
– data block.
S Information for number of indirect elements of the list/display (IEL) is incorrect.
S Variable text is selected but status or offset is not cancelled.
S Variable value has been selected but status not cancelled.
Check the information for
S Start of range pointer,
S Length of range pointer and
S Cursor pointer
and check their relationship to one another
S Check deselection of status or offset
3036 Variable status faulty Acknowledgement key
S Cyclic
S Status taken from display description
In the display description form variable status, which can only be selected by the PLC, an incorrect data group has
been specified or variable status has not been cancelled.
The display description must be modified with the aid of the NC workstation.
3037 User window faulty Acknowledgement key
On control power-up
Displays to be shown in incorrect user windows are not displayed.
User windows can be defined in the UMS. These must lie within the configuring area, otherwise an alarm is given.
Check and correct user window in the UMS.
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
1 Alarms
1.5.1 Alarm description

Siemens SINUMERIK 840C Specifications

General

Brand	Siemens
Model	SINUMERIK 840C
Category	Control Unit
Language	English