Siemens SINUMERIK 840DE SL - Page 254

Example 3: Turning
;
=






Program code Comment
…
N20 T1 D1 ; Only tool length compensation is activated.
N30 G0 X100 Z20 ; X100 Z20 is approached without compensation.
N40 G42 X20 Z1 ; Radius compensation is activated, point X20/Z1 is
approached with compensation.
N50 G1 Z-20 F0.2
…
Fundamentals
2.10 Tool radius compensation
NC programming
254 Programming Manual, 12/2019, 6FC5398-2EP40-0BA0