Keyword Coupling characteristics / mean‐
ing
Syntax
CPBC Block change criterion CPBC[FAx]="<block change criterion>"
"<block change
criterion>":
"NOC" Block change is performed
irrespective of the coupling
status.
"IPOSTOP" Block change is performed
with setpoint synchronism.
"COARSE" Block change is performed
with actual value synchron‐
ism “coarse”.
"FINE" Block change is performed
with actual value synchron‐
ism "fine".
CPFPOS + CPON Synchronized position of the fol‐
lowing axis when switching on
CPON=FAx CPFPOS[FAx]=<value>
CPLPOS + CPON Synchronized position of the
leading axis when switching on
CPLPOS[FAx,LAx]=<value>
Work preparation
3.16 Axis couplings
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0 935
To Next Page
Loading...
