3.8 SmartOperation and MultiTouch operation
You have the following setting options for specific adjustment to SmartOperation and for
MultiTouch operation:
● Automatic adjustment of the field height and field width to the so-called minimum usable
field size and the line spacing (mask attribute MA).
● Optimized and pixel-precise stretching of the fields for higher resolutions (mask attribute
PA).
● Setting of the field height and line spacing proportional to the font (mask attribute FA).
● Allows free scrolling so that the input field is not covered by the virtual keyboard (mask
attribute KM).
Further details can be found in Chapter Defining dialog properties (Page 49), Section
"Programming".
Fundamentals
3.8 SmartOperation and MultiTouch operation
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1 45
To Next Page
Loading...
