Siemens SINUMERIK 840DE SL

PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
43
Configuring the system
2
2.1
System settings
2.1.1
Configuring the communication via MPI
If you are using a PCU in conjunction with a SINUMERIK 840D powerline and require MPI
communication, you must install the S7DOS 8.4 communication driver. In all other cases,
you do not have to install this driver.
The setup for this communication driver can be found in the following directory:
●
D:\updates\