Configuring the system
2.3 Customized settings during boot up
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
61
Starting applications in service mode
Starting other applications
If other applications are to be started in service mode, enter them with their complete path in
the [OEMRun] section in the file WINBOM.INI:
Example: Starting the "Notepad" program
[OEMRunOnce]
"Start WinVnc", "x:\I386\system32\StartWinVnc.exe"
"Check Password","x:\I386\system32\CheckPEPwd.exe"
[OEMRun]
"Start Backup/Restore", "x:\I386\system32\GhostOrder.exe"
"notepad","e:\windows\notepad.exe"
All other entries must not be changed.
To Next Page
Loading...
