"Custom" operating area
8
8.1 How to activate the "Custom" operating area
Activating the "Custom" operating area
The "Custom" operating area is not activated on delivery.
1. First copy the slamconfig.ini. file from the
[System Siemens directory]
/cfg directory to the
[System oem directory]
/cfg directory
or correspondingly to the
[System add_on directory]
/cfg directory or
[System user
directory]
/cfg directory.
2. To activate the "Custom" operating area, the following must be entered:
[Custom]
Visible=True
Result
After activation is complete, the softkey for the "Custom" operating area can be found in the
main menu (F10) on the menu continuation bar on the HSK4 (= default).
The "Custom" operating area displays an empty window covering the entire operating area,
with a configurable header. All horizontal and vertical softkeys can be configured.
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1 273
To Next Page
Loading...
