Siemens SINUMERIK 840DE SL

<!-- **** For all multitools *** -->
<TOOLTYPE_9997>
<!-- **** Display for all multitool location types *** -->
<Item value="MultiToolPlaceSpecIdent" type="QString" />
</TOOLTYPE_9997>
</COLUMN11>
</SlTmToolmagazinForm>
</LISTCONFIGURATION>
<!-- **** Configuration of the magazine location types *** -->
<PLACETYPECONFIGURATION>
<!-- **** Magazine location type 1 *** -->
<PLACETYPE1>
<!-- **** Text identifier of the toggle box entry *** -->
<Text value="TMMP_ITEM_NORMAL_TOOL" type="QString" />
<!-- **** Text identifier of the tooltip *** -->
<Tooltip value="TMMP_TT_NORMAL_TOOL" type="QString" />
</PLACETYPE1>
<!-- **** Magazine location type 2 *** -->
<PLACETYPE2>
<Text value="TMMP_ITEM_HEAVY_TOOL" type="QString" />
<Tooltip value="TMMP_TT_HEAVY_TOOL" type="QString" />
</PLACETYPE2>
<!-- **** Magazine location type 3 *** -->
<PLACETYPE3>
<Text value="TMMP_ITEM_BIG_TOOL" type="QString" />
<Tooltip value="TMMP_TT_BIG_TOOL" type="QString" />
</PLACETYPE3>
<!-- **** Magazine location type 4 *** -->
<PLACETYPE4>
<Text value="TMMP_ITEM_SENSITIVE_TOOL" type="QString" />
<Tooltip value="TMMP_TT_SENSITIVE_TOOL" type="QString" />
</PLACETYPE4>
</PLACETYPECONFIGURATION>
</CONFIGURATION>
12.4.2.2 Adaptation of the customer text file
The following excerpt shows the contents of the "sltmlistdialog_eng.ts" customer text file.
The file in this example is stored in the "user/sinumerik/hmi/lng" directory.
Tool management
12.4 Examples
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 239