Example 2
<MOREDATACONFIGURATION>
<TOOLTYPE_ALL_500>
<ROW1_COL1>
<Item value="TM_DGL_LENGTH" type="QString" />
</ROW1_COL1>
<ROW2_COL1>
<Item value="GeoLengthGeoAx3" type="QString" />
</ROW2_COL1>
...
</TOOLTYPE_ALL_500>
<WITHOUT_MORE_DATA>
<TOOLTYPE_580 />
</WITHOUT_MORE_DATA>
</MOREDATACONFIGURATION>
12.2.7 Configure the "New tool - favorites" window
<NEWTOOLFAVORITECONFIGURATION> tag
In the tag <NEWTOOLFAVORITECONFIGURATION> you define the tool types that are most
frequently used. The specified tool types are displayed in the "New Tool - Favorites" window.
Entries Meaning
StaticTooltypes Numbers of tool types Enter the individual numbers, separated by blanks.
The following section describes the assignment of the tool type and num‐
ber: List of tool types (Page 195)
Example
<NEWTOOLFAVORITECONFIGURATION>
<StaticTooltypes value="120 140 200 220 710 711" type="QString"/>
<AdditionalStaticTooltypes value="" type="QString"/>
</NEWTOOLFAVORITECONFIGURATION>
Tool management
12.2 Configuring the user interface
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 201
To Next Page
Loading...
