12.2.23 Configure the code carrier connection
Requirement
Software option
You require the "Access MyTool ID" option for this function (Tool Ident Connec‐
tion).
<IDENTCONNECTIONCONFIGURATION> tag
The entries used for configuring the code carrier connection in the tool list of the user interface
are located in the <IDENTCONNECTIONCONFIGURATION> tag. The code carrier
connection is implemented via TDI Ident Connection.
Tool management
12.2 Configuring the user interface
SINUMERIK Operate (IM9)
224 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
