3. Enter a complete file name - as specified in the example.
4. Confirm with "OK". This can take several minutes.
The operation is displayed:
Figure 3-9 Backing up ...
A message is output after the operation has been successfully completed.
See also
The procedure for "Backup complete CF card to network drive" is essentially the same. In
addition, you connect to a network drive:
This is how you connect to a network drive (Page 67)
Service and diagnostics
3.3 Backup data via the service menu
NCU operating system
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 77
To Next Page
Loading...
