Siemens SINUMERIK 840DE SL - Page 1455

Commissioning the system
1.4 BIOS settings for PCU 50.3
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
35
Hardware options
Fan control
Enabled
CRT/LCD selection
Simultan. Auto
Menu: Advanced
System parameters
Default settings
Own entries
Installed O/S
Other
Reset configuration data
No
Legacy USB support
Disabled
USB controller restart
Enabled
I/O Device Configuration
Internal COM 1
Enabled
Base I/O address
3F8
Interrupt
IRQ 4
PCI Configuration
PCI device slot 1
Option ROM scan
Enabled
Enable master
Enabled
Latency timer
Default
PCI device slot 2
Option ROM scan
Enabled
Enable master Enabled
Latency timer
Default
SATA/PATA Configuration
PATA Controller: Enabled
SATA Controller mode
Enhanced
AHCI Configuration
Disabled
RAID support
Disabled
Menu: Security
System parameters
Default settings
Own entries
Supervisor password is
Disabled
User password is
Disabled
Set user password
Enter
Set supervisor password
Enter