4. Under step "Name, Description, and Settings," make a note of the Share path, which is a
combination of the computer name and the share name. You will have to specify this name
when you create a link to the network drive on the Siemens PC system.
Figure 6-14 Create A Shared Folder Wizard - Name, Description, and Settings
Backing up and restoring data
6.12 Operating a service PC/PC in the network
PCU Base Software (IM10)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 149
To Next Page
Loading...
