; Use the following settings to use this status bits instead of the
led map for a specific sk
;U1LED=/channel/parameter/R[U1,1]
;....
;U16LED=/channel/parameter/R[U1,16]
;VarIncLED = DB11.DBX8.5
;SBLLED = DB21.DBX0.4
;WCSLED = DB19.DBX0.7
; Show a LED for the var inc sk
;showVarIncLED = true
; Show a LED for the var single block sk
;showSBLLED = true
; Show a LED for the var wcs/mcs sk
;showWCSLED = true
HT 8
24.3 Configuring the function display at user-specific keys (U keys)
SINUMERIK Operate (IM9)
690 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
