– E.g. read, write, setup monitoring
Figure 3-11 NodeID "Sinumerik > Channel > Parameter > R"
– The attributes of a NodeID can be queried via the entry "View Attributes". One of these
attributes is the "Value", which provides the corresponding value of R1.
Figure 3-12 Viewing node attributes
Setting up of OPC UA server
3.5 Testing the connection
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Configuration Manual, 12/2017, 6FC5397-1DP40-6BA1 29
To Next Page
Loading...
