Possible procedure
1. Declare the global part program memory in the "Creating drives" window
2. Shift the content of the local program memory with SPF, MPF and WCS directory to an
external drive, e.g. to a USB-FlashDrive.
3. Copy the directories that have been backed up to the global part program memory.
Additional information about managing the program memory is available in the following
documentation:
References
Job Planning Programming Manual, Chapter "File and Program Administration" > "Program
memory"
Creating drive connections
5.4 Creating a global part program memory
SINUMERIK Operate (IM9)
84 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
