The connection to the MCP is made via the USB 2.0 interface. The key module can be installed
in both the horizontal and vertical installation position.
Furthermore, the passive modules "Key module 1x3" (Page 25) and "Key module 1x2"
(Page 25) can be connected.
Figure 3-2 Keypad module 3x5
3.4.2 Key module 3x4
This is a key module with 12 illuminated short-stroke keys with replaceable key caps.
The connection to the MCP is made via the USB 2.0 interface. The key module can be installed
in both the horizontal and vertical installation position.
Furthermore, the passive modules "Key module 1x3" (Page 25) and "Key module 1x2"
(Page 25) can be connected.
Figure 3-3 Key module 3x4
3.4.3 Key module 3x3
This is a key module with 9 illuminated short-stroke keys with replaceable key caps.
The connection to the MCP is made via the USB 2.0 interface.
Furthermore, the passive modules "Key module 1x3" (Page 25) and "Key module 1x2"
(Page 25) can be connected.
Operator control and display elements
3.4 Key modules
ONE MCP Part 1: MCP xxxx
24 Equipment Manual, 07/2020, A5E50324729B AA
To Next Page
Loading...
