Siemens SIPROTEC 7RW80 User Manual

Appendix
A.4 Default Settings
SIPROTEC, 7RW80, Manual
C53000-G1140-C233-1, Release date 10.2010
219
A.4 Default Settings
A.4.1 LEDs
Table A-1 Preset LED displays
A.4.2 Binary Input
Table A-2 Binary input presettings for all devices and ordering variants
Table A-3 Further binary input presettings for 7RW802*
LEDs Default function Function No. Description
LED1 Relay TRIP 511 Relay GENERAL TRIP command
LED2 Not configured 1 No Function configured
LED3 Not configured 1 No Function configured
LED4 Not configured 1 No Function configured
LED5 Not configured 1 No Function configured
LED6 Fail V balance 167 Failure: Voltage Balance
Fail Ph. Seq. V 176 Failure: Phase Sequence Voltage
VT brk. wire 253 Failure VT circuit: broken wire
LED7 Not configured 1 No Function configured
LED8 Brk OPENED Breaker OPENED
Binary Input Default function Function No. Description
BI1 not pre-assigned - -
BI2 >52-b 4602 >52-b contact (OPEN, if bkr is closed)
BI3 >52-a 4601 >52-a contact (OPEN, if bkr is open)
Binary Input Default function Function No. Description
BI4 not pre-assigned - -
BI5 not pre-assigned - -
BI6 not pre-assigned - -
BI7 not pre-assigned - -

Siemens SIPROTEC 7RW80 Specifications

General

Brand	Siemens
Model	SIPROTEC 7RW80
Category	Relays
Language	English