Appendix
A.5 Default Settings
SIPROTEC, 7SJ62/64, Manual
C53000-G1140-C207-2, Release date 01.2008
618
for the 4-line Display of 7SJ62
Figure A-59 Default display of 7SJ62 for models without extended measured values
(13th digit of MLFB = 0 or 1)
Page 7 and page 9 of the default display can only be used if for the current connection (parameter 251 CT
Connect.) one of the two special connection types (A,G2,C,G; G->B or A,G2,C,G; G2->B) was selected
(see description of Power System Data 1).
www . ElectricalPartManuals . com
To Next Page
Loading...
