Siemens SIRIUS 3RW5 - Page 36

Connection
5.1 Connecting the bus connector
SIRIUS 3RW5 EtherNet/IP communication module
36 Manual, 05/2019, A5E45131885002A/RS-AA/001
Procedure
Illustration similar
1. Plug the bus connector of the cable into the socket of the 3RW5 communication module.
2. Secure the cable with a cable tie.
Result
The 3RW5 communication module is now properly mounted and connected. You can
integrate the 3RW5 soft starter into the associated network environment.