Description, device design, dimension drawing
2.1 Device description
SITOP expansion modules
Equipment Manual, 09.2022, A5E36605235-2-76
19
①
24 V input – supply voltage from power supplies 1 and 2 as well as 0 V connection to the inter-
24 V output – supply voltage to the load and floating relay contact
Potentiometer for setting the signal threshold
Latch for manual unlocking
Lug for unlocking using a screwdriver
RST button to switch on again
Figure 2-3 Design 6EP1962-2BA00
To Next Page
Loading...
