Siemens SITOP PSE202U - Other Mounting Positions; Sitop Red1200; 6 Ep4346-7 Rb00-0 Ax0

Mounting position, mounting clearances
4.2 Other mounting positions
SITOP expansion modules
Equipment Manual, 09.2022, A5E36605235-2-76
59
4.2 Other mounting positions
4.2.1 Other mounting positions
For mounting positions that deviate from the standard mounting position, derating factors
(reduction of the output power or the permissible ambient temperature) must be observed in
accordance with the following diagrams.
Note
In the case of mounting positions that deviate from the standard mounting position, reduced
mechanical resistance of the devices against vibration and shock must be expected.
Especially when installing on a vertically fastened standard mounting rail, additional
measures may be required, e.g. to prevent the device
from slipping on the standard
mounting rail.
4.2.2 SITOP RED1200
4.2.2.1 6EP4346-7RB00-0AX0
Figure 4-8 Mounting position 1