Siemens SITOP PSE202U - Output Connections; Redundancy Modules; Sitop Red1200

Installation
5.2 Output connections
SITOP expansion modules
Equipment Manual, 09.2022, A5E36605235-2-76
79
5.2 Output connections
5.2.1 Redundancy modules
5.2.1.1 SITOP RED1200
Output "DC OUT1" of the redundancy module must be connected to the load.
See Figure 5-1 Input/output (Page 74).
The subsequent wiring is recommended to guarantee safe and reliable operation of the
power supplies in all operating states:
Figure 5-9 Wiring 1 module (2 × 20 A)