Installation
5.2 Output connections
SITOP expansion modules
Equipment Manual, 09.2022, A5E36605235-2-76
83
5.2.1.2 SITOP PSE202U
Output "Out 24 V" of the redundancy module must be connected with the load.
The output cable of the redundancy module must have a cable cross
-
section that can conduct
the maximum total current of both supplying power supplies.
Figure 5-14 Output 6EP1961-3BA21
Figure 5-15 Output 6EP1962-2BA00 and 6EP1964-2BA00
To Next Page
Loading...
