Siemens SITOP PSU8600 - Page 12

Hardware and software requirements
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
12 Function Manual, 11.2017, A5E37764016-06-76
Software requirements
Table 4- 2
Component
Article number
Number of components
SIMATIC WinCC V7.3/V7.4
6AV63.1-…7-3…
Depends on the required
target system.
SIMATIC WinCC flexible 2008 SP3 6AV66.1.-...-3…
SIMATIC STEP 7 Professional V5.5
6ES7810-4C...10-...