Siemens SITOP PSU8600 - 5 Blocks of the Library; Introduction

SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
13
Blocks of the library
5
5.1
Introduction
Scope of the library
The library is basically divided into two parts: SIMATIC STEP 7 and WinCC. Each of the
parts contains the individual library elements for the respective control and HMI system.
Variants
The library contains two basic variants of the faceplates for:
● WinCC
● WinCC flexible
In addition to the faceplates, the library also contains User Data Types (UDT) for the data
connection of SIMATIC STEP 7 blocks.
Figure 5-1