Siemens SITOP PSU8600 - Inserting HMI Tags

Integrating the library contents
6.3 Working with the library in WinCC V7.3
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
87
6.3.3
Inserting HMI tags
Procedure
The following steps describe how to import the files from library folder “HMI Tag table
(WinCC V7.3)” into the WinCC project.
Table 6- 10
Step
number
Instruction
1
Save the folder “HMI Tag table (WinCC V7.3)” from the library on your hard disk.
2 Open the WinCC project.