Siemens SITOP PSU8600 - Fb Sitop_Psu8600_S_V2

Blocks of the library
5.2 Explanation of SIMATIC STEP 7 blocks
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
34 Function Manual, 11.2017, A5E37764016-06-76
Descriprtion of
Error
parameter
Table 5- 22
Error state
Meaning
Remedy/notes
0
No error
1 Output number not correct. Only use output numbers between 1 to 36.
1 PSU8600 + 4 CNX8600 = 20 outputs in total.
(4 + 4 x 4 = 20) CNX8600 24V/8x2.5A: 5 to 36
5.2.7
FB SITOP_PSU8600_S_V2
Function principle
The block reads data of the PSU8600 main module (power supply with 1 output) and writes it
to the global transfer data block.
Block diagram
Figure 5-13