Blocks of the library
5.2 Explanation of SIMATIC STEP 7 blocks
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
25
FB SITOP_PSU8600_MU_V2
Function principle
The block reads the main-module-specific data from the global data block for data exchange
and outputs the data through its output parameters.
On request, the block writes main-module-specific data first into Cyclic Output Memory area
(if address is provided) and then into the PSU8600 device.
Figure 5-9
To Next Page
Loading...
